Converter 6

Converter
Converter from ArtNET to DMX or SPI protocol to control lighting fixtures with a built-in Ethernet switch with 6 configurable ports.
6U
24U
Custom output ports settings
6
from
up to
Scalability
RDM support
RDM is fully supported over ArtNet, including ArtRDM, all other required packets, and full and continued discovery of RDM devices.
SPI support
Supports interference-free signal transmission for SPI strips and pixels up to a distance of 300 meters. Supports any IC with single-wire control, such as: UCS8903, GS8206, APA104, GS8208, WS2811, WS2812, WS2818, SK6812, UCS1903, TM1804 and others.
High-speed DMX
Supports non-standard high-speed DMX protocol with an extended address range of up to 2048 addresses and data rates up to 1024 kbps per port (4 universes per port).
Easy installation
Adapted for mounting on a DIN rail and for installation in electrical cabinets with convenient front service. Also one Ethernet port supports PoE connection.
Static IP or DHCP mode
Daisy-Chain
Reliability
Standby scene function
The IP address can be set automatically via DHCP or manually using the Light Stream software.
Input output mode for each port separately.
Built-in dual-port 100Mbit Ethernet switch allow for separate network connections as well as linearly daisy-chaining several devices together up to 10 converters.
Each port has an individual galvanic isolation for power and signal
In the absence of ArtNET signal, the converter can play a standby scene stored in the controller's internal memory of 512 channels for each DMX port, which is a single static light scene.
More features
DMX Input/output
Technical Specifications
Ergonomics
Interfaces
Case
Voltage and consumption
Temperature Operating
-40°C to +50°C
8-48V DC, PoE to 24-48V DC, up to 5 W
Power connectors
Storage temperature
5% to 85%, non-condensing
-50°C to +70°C
Air discharge ± 15 kV DC
IP Rating
IP20
Warranty
2 years of limited manufacturer's warranty
screw terminal connectors for cables up to 1.5 mm²
Metal, with additional fasteners for mounting on DIN rail
Weight
Interface
DMX output
Number of
addresses per port
Connector
Galvanic isolation
on the ports
Dimensions
2 x 100Mbit/s Ethernet ports (built-in switch)
420 g
6 bidirectional ports (RDM support)
512 or 2048 (optional for SPI and high speed DMX)
screw terminal connectors for cables up to 1.5 mm²
By signal: optical
By power supply: up to 1000V DC
148 mm • 108 mm • 34 mm
Operating conditions
Humidity
Resistance to electrostatic discharges
Power consumption
5W. 480mA@8V, 300mA@12V, 150mA@24V, 75mA@48V